Mattur Construction

Power that keeps the job moving.

20–30% less fuel with factory-direct service.

Start an Order

Why crews switch to Mattur

20–30% Less Fuel

Variable RPM matches real load, so fuel burn tracks actual work—not unused peak capacity.

One Platform, Any Job Size

Same system from small to large—less complexity, simpler training, easier fleet management.

2× Surge. No Oversizing.

Delivers up to 2× peak power for hard starts—no voltage drop, no RPM change, no oversizing.

Single + Three-Phase, Multi-Voltage

One system handles mixed loads across voltages—single- and three-phase at the same time, no extra equipment or switching.

Fuel Burn should follow work.

Legacy generators waste fuel at partial load. Mattur doesn't.

Power Load Low to High
Engine RPM Legacy stays high, Mattur follows load
Legacy RPM (fixed)
Mattur RPM (variable)
Legacy RPM
0 RPM
Mattur RPM
0 RPM
Cumulative Fuel Burn (gallons) Lower slope = less fuel
Legacy (Fixed RPM)
Mattur (Variable RPM)
Legacy
0.00 gal
Mattur
0.00 gal
Savings
0%

Intelligent Transient Boost

Full surge power. No bigger unit.

Up to 2× Peak Power with Intelligent Transient Boost. No oversizing.

Legacy: Voltage dips on hard starts vs. Mattur: Instant surge delivery with stable voltage

One System.
Every Load.

Mattur delivers single- and three-phase simultaneously from one integrated power architecture.  No extra generators. No workarounds.

  1. 1. Single- and three-phase at the same time
  2. 2. Fewer cables and support equipment
  3. 3. Stable output as demand changes

Replace multiple generators with one integrated system.

Mattur Edge trailer showing simultaneous single- and three-phase power outputs
Battery Integration

Power + Storage. One Platform.

Battery modules share the same platform and form-factor as the 14 kW power modules — fitting into the same trailers and skid-mounted enclosures. Mix power and batteries in any ratio the job needs.

Modularity
Shared chassis
Same chassis as the 14 kW power modules — drop-in, swap-out.
Deployment
Deploy your way
Deploy in trailers or skid-mounted enclosures, configured per site.
Efficiency
Lower emissions
Cut emissions and engine hours on light-load and overnight cycles.

One architecture. Any Scale.

Mattur is built from standardized 14 kW power modules that deploy standalone, aggregate into trailers and scale across multiple Power Blocks — adapting as the job grows.

14 kW

Power Module

Mattur 14 kW Power Module illustration

Edge 28 Trailer

Up to 2, 14 kW Power Modules

Mattur Edge 28 Trailer illustration

Edge 56 Trailer

Up to 4, 14 kW Power Modules

Mattur Edge 56 Trailer illustration

Skid-mounted Power Block 140kW

Scales without limit

Mattur Skid-mounted Power Block 140kW illustration
Scale
Add capacity in 14 kW increments from a single module to a site wide distributed system without replacing equipment.
Flexibility
Deploy standalone, inside Edge trailers, or across multiple Power Blocks - and reconfigure as the job evolves.
Uptime
Service or swap individual modules without shutting down the entire system.
Cost Efficiency
Standardize your fleet around one modular building block instead of multiple dedicated generator sizes.

Mattur vs. the generator on your jobsite today

Jobsite need Legacy generator Mattur
Fuel efficiency at partial load Fixed RPM — full burn regardless of load Variable RPM — 20–30% less fuel
Hard starts (cranes, compressors) Requires oversizing 2× peak via Intelligent Transient Boost
Mixed phase loads Split-phase limits, extra equipment Single + three-phase simultaneously
Right-sizing as job evolves Replace the unit Add or remove 14 kW modules
Service and maintenance Full shutdown Swap a module, system stays online
Noise and engine wear Fixed RPM Variable RPM + hybrid-ready
Fleet management Multiple sizes and SKUs One modular platform
American-Made Modular Power

Get pricing & availability

Tell us what you need to power and when. We’ll quote rental or purchase options in 24 hours.

Get In Touch
Mattur Edge trailer deployed on a jobsite